Refer below technical data sheet (Available BSP / NPT)
Screwed / Flange
SS ASTM A351 Grade CF8 / CF8M
| PTFE + Silicon / Viton |
| 10°C to 180°C |
-10°C to 70°C
Steam, Hot Water, Hot Fluid, Oil
Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
| 24AC | 110AC | 230AC | 12DC | 24DC |
| 9W | 9W | 9W | 10W | 11W |
90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces.
Available on Request. - High Pressure 20Kg Series. - Manual Override
High Reliability Unaffected by Voltage Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require.
Epoxy square coil, Metallic round enclosure, IP-67 Flame proof enclosure, IP-68 Weather proof enclosure.
Use of filter in the inlet port is recommended.
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| HCP209BNIWV0 | CF8 / CF8M | ½” | 17 | 1.5 | 12 | PTFE | 4 |
| HCP309BNIWV0 | CF8 / CF8M | ¾” | 20 | 1.5 | 12 | PTFE | 7 |
| HCP409BNIWV0 | CF8 / CF8M | 1” | 25 | 1.5 | 12 | PTFE | 12 |
| HCP509BNIWV0 | CF8 / CF8M | 1¼” | 36 | 1.5 | 12 | PTFE | 23 |
| HCP609BNIWV0 | CF8 / CF8M | 1½” | 36 | 1.5 | 12 | PTFE | 23 |
| HCP809BNIWV0 | CF8 / CF8M | 2” | 47 | 1.5 | 12 | PTFE | 38 |
| HCA254BNIWV0 | CF8 / CF8M | ½” | 17 | 4 | 45 | PTFE | 4 |
| HCA354BNIWV0 | CF8 / CF8M | ¾” | 20 | 4 | 45 | PTFE | 7 |
| HCA454BNIWV0 | CF8 / CF8M | 1” | 25 | 4 | 45 | PTFE | 12 |
| HCA554BNIWV0 | CF8 / CF8M | 1¼” | 36 | 4 | 45 | PTFE | 23 |
| HCA654BNIWV0 | CF8 / CF8M | 1½” | 36 | 4 | 45 | PTFE | 23 |
| HCA854BNIWV0 | CF8 / CF8M | 2” | 47 | 4 | 45 | PTFE | 38 |
| Model No. | Port Size | Diagram No. | A | B | C | D | E | E1 |
|---|---|---|---|---|---|---|---|---|
| HCP209BNIWV0 | ½” | 18.1 | 67 | 138 | 110.5 | 60 | 50 | 63 |
| HCP309BNIWV0 | ³⁄₄” | 18.1 | 81 | 145.2 | 112.5 | 71 | 50 | 63 |
| HCP409BNIWV0 | 1” | 18.1 | 96 | 161 | 120 | 75 | 50 | 63 |
| HCP509BNIWV0 | 1¼” | 18.1 | 108 | 169.5 | 123.5 | 96 | 50 | 63 |
| HCP609BNIWV0 | 1½” | 18.1 | 108 | 169.5 | 123.5 | 96 | 50 | 63 |
| HCP809BNIWV0 | 2” | 18.1 | 132 | 196 | 140.8 | 114 | 50 | 63 |
Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.
