Model No
| L1A106BV0 | L1A706BV0 | L1A206BV0 | L1A306BV0 | L1A406BV0 |
Media
Compressed air - Filtered
Port Size
| G¼ | G³⁄₈ | G½ | G¾ | G1 |
Flow Rate LPM
| 1350 | 3000 | 5650 | 7200 | 9000 |
maximum supply pressure
10 Bar
Ambient Temperature
-10°C to +50°C
Media Temperature
+5°C to +50°C
Bowl Material
Polycarbonate
installation
Vertical (as in the picture)
Materials of construction
Aluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile
optional accessories
Clamp, Modular mounting kit
min operating flow
| 12 | 40 | 45 | 50 | 50 |
recommended oil
ISO VG 32 (Servo System 32)
Bowl Capacity Lubricator
| 20 | 57 | 152 | 200 | 200 |
Note
Supply Pressure 6 bar, pressure drop Δp = 0.5bar (For Standard Models)
- Conforms to ISO 6301-1
- Suitable for modular mounting
- Fog/Mist type
- Fine adjustment of lubrication
- Lubrication proportional to flow
- Note the direction of flow before installation and connect piping accordingly
- Flush pipings for dirt, dust, rust and other foreign particles
- Install in clean atmosphere.
- Nipples of taper threads to be used with tape.Ensure teflon tape does not enter the unit during tightening Nipples of straight threads to be used with sealing washer
- Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents,trichloroethylene, kerosene or other aromatic hydrocarbons.
- Oil may be filled when under pressure. However it is recommended to vent the air completely before filling the oil.
| Model No. | Diagram No. | W | A | B | E | F | J | K | L | T |
|---|---|---|---|---|---|---|---|---|---|---|
| L1A106BV0 | 1.1 | ¼" | 40 | 124 | 42 | 30 | 28 | 15 | 5.5 | 2 |
| R1A706BV0 | 1.1 | ⅜” | 55 | 150 | 44 | 40 | 40 | 25 | 6.5 | 2 |
| R1A206BV0 | 1.1 | ½” | 70 | 181 | 46 | 50 | 55 | 15 | 8.5 | 2 |
| L1A306BV0 | 1.1 | ¾” | 90 | 267 | 47 | 70 | 66 | 35 | 11 | 5 |
| L1A406BV0 | 1.1 | 1" | 90 | 267 | 47 | 70 | 66 | 35 | 11 | 5 |