Type of mounting
Direct surface mounting or mounting on base plate
Media Temp
+3°C to +30°C
Body Material
Aluminum (Hard Anodized)
Valve piston & seal
FDA compliant synthetic material
O’ rings
NBR
Bolts
Zinc Coated
Pre-lubrication
H1 compliant (registered NSF class H1)
Maintenance free life time
Typically exceeds 25 Million cycles
Model No
HPBV
Operation
Poppet valve, solenoid pilot actuated
Media
Compressed air (purity class 7.4.4)*, 40μm filtered
*acc. to ISO 8573-1:2001
Ambient Temp
0°C to +50°C
Cycles Tested
25 Million cycles
| Low Pressure (P1)* | 2/2-way valve, normally closed |
| High Pressure (P2)* | 2/2-way valve, normally closed |
| Exhaust (EXH) | 2/2-way valve, normally open |
| Air Recovery | 2/2-way valve, normally closed |
*with integrated non-return valve
| O’rifice size | Kv m³ / hr | |
| Low Pressure (P1) | 12mm | 2.7 |
| High Pressure (P2) | 16mm | 7.4 |
| Low Pressure (P1) | 22mm | 10.5 |
| Low Pressure (P1) | 16mm | 7.4 |
| Low Pressure (P1)* | G3/4” Female |
| High Pressure (P2) | G1” Female |
| Exhaust (EXH) | G1/4” Female |
| Pilot air supply (P3) | G1/4” Female |
| Air Recovery | G1” Female |
| Low Pressure (P1) | 3/2 NO Solenoid Spring Return Valve |
| High Pressure (P2) | 3/2 NO Solenoid Spring Return Valve |
| Exhaust (EXH) | 3/2 NC Solenoid Spring Return Valve |
| Air Recovery | 3/2 NO Solenoid Spring Return Valve |
| Low Pressure (P1) | 2 to 10 Bar |
| High Pressure (P2) | 3 to 40 Bar |
| Pilot air supply (P3) | 6 to 7 Bar |
- Advanced high-pressure sealing technology
- Robust, compact, and lightweight construction
- Proven and highly reliable performance
- Easy maintenance and service-friendly design
- High-flow exhaust capability
- Minimal dead volume (< 35 ml)
- Low power consumption (2 W)
- Optional adjustable pre-blow (P1) flow control unit
- High Pressure block for stretch blow moulding machines.
- For rotary and linear SBM machines.
- Best suited for PET bottles up to 5 litres, depending on cycle time.
